Automated Stages

Media Cybernetics Provider of the Year Award

500-ES103 OptiScan
3 axis stage system

MSLP: $5,525.00

	Integral Slide Holder for upright microscopes
	A variety of sample holders such as for slides, petri dishes, 96 well plates and metallurgical samples for inverted microscopes
	1 Micron Resolution (XY), 0.1 Micron Resolution (Z)
	5 Micron Repeatability (XY), 0.2 Micron Repeatability (Z, with encoder probe)
	76mm x 51mm travel for upright microscopes

	115mm x 77mm travel for inverted microscopes
	RS-232C Computer Interface with selectable 9600-38400 BAUD
	Plug & Play Capability
	Optional Filter Wheel and Shutter capability

The OptiScan ES103 Stage and Focus System provides an economical solution for many
routine motorized scanning stage and focus applications. The ES103 includes the OptiScan
controller, XY motorized stage, focus drive and 2 axis joystick with digipot. More Info...

500-ES102 OptiScan
2 axis stage system

MSLP: $4,750.00

	Integral Slide Holder for upright microscopes
	A variety of sample holders such as for slides, petri dishes, 96 well plates and metallurgical samples for inverted microscopes
	1 Micron Resolution
	5 Micron Repeatability
	76mm x 51mm travel for upright microscopes

	115mm x 77mm travel for inverted microscopes
	RS-232C Computer Interface with selectable 9600-38400 BAUD
	Plug & Play Capability
	Optional Filter Wheel and Shutter capability

The OptiScan ES102 Stage System provides an economical solution for many routine motorized scanning stage applications. The ES102 includes the OptiScan controller, XY motorized stage, and joystick. More Info...

500-H101 ProScan
3 axis stage system

MSLP: Contact IPS for exact configuration

Stage travel options:

	4" x 3"
	9" x 3"
	6" x 6"
	10" x 8.5"
	12" x 4"
	12" x 12"

	0.1 um resolution
	+/- 1-5 um repeatability (depends on stage size)
	+/- 3-20 um accuracy (depends on stage size)

ProScan provides the highest precision movement available in a microscope stage. The stages come fitted for easy installation on virtually any microscope. The H128 controller comes with a standard RS-232 port and connections for a joystick, trackball or programmable keypad. Precision focus drives are available for simple focus or automated focusing. Couple this stage with ImagePro and ScopePro for a fully automated inspection/analysis system. Fits on Olympus, Nikon, Leitz, and Zeiss microscopes. More Info...

Product information within this page was obtained from the manufacturers written specifications. Due to ongoing product development, component availability and technology advancements specifications may change without notice. IPS is not responsible for the accuracy of the above specifications.